Précautions d'utilisation et entretien de la machine à perles de boba

The boba pearls machine is characterized by its efficient and high-quality production. It can automatically produce boba pearls and reduce labor costs. Therefore, it is very popular in some food processing factories and tea shops. Let’s learn some tips on how to use the boba pearls machine！

Que dois-je faire pour la première fois ?

Cette étape est très nécessaire pour vérifier si la machine à perles de boba peut fonctionner normalement. Voici les détails de fonctionnement :

First right-hand pull up the emergency stop switch, press the total power switch green button, then press the face power switch, cutting knife-power switch green button, and finally face speed control knob, cutter speed control knob, right turn to two digital display screen display 50. The wait empty machine running for 10 minutes, and observe whether there is any fault or noise, stops after no abnormality.

Étapes de production de la machine à perles de boba

1. After the idle machine has finished running, turn the surface speed knob and cutting speed knob to the left.
2. Turn on the power switch on the side of the main power switch, and turn the facial control knob to the facial speed digital display to display 30. Observe whether the pressure roller is eating material.
3. After pressing the surface roller, observe whether the roller and the guide wheel are feeding the dough smoothly in the transparent observation panel, and turn on the tool power switch. The two-digit display number 50 is displayed on the right side of the tool speed control knob.
4. Slowly adjust the cutter speed control knob to the left. After placing the dough into the forming wheel, watch it form. When the material is smaller than the diameter of the forming groove, the cutting speed can be slowed down or the dough speed can be accelerated. When the material is larger than the diameter of the forming groove, the cutting speed can be slowly increased or the dough speed can be slowed down.
5. Lorsque le diamètre du matériau est cohérent avec le diamètre de la rainure de formation, arrêtez l'ajustement de la vitesse de surface ou de la vitesse de coupe.

Entretien de la machine et sécurité

Sécurité :

• Interdisez l'alimentation sans interruption pour l'entretien.
• When the machine is running, it is forbidden to remove the side sealing plate A, the side sealing plate B, the front sealing plate, and the rear sealing plate.
• When the machine is running, it is forbidden to press the face wheels and the pressure wheel B by hand.
• When the machine is running, it is forbidden to adjust the cutter and the pallet by hand.

Entretien :

• Coupez l'alimentation de la machine pendant l'entretien.
• Vérifiez la chaîne, les boulons de fixation, etc. tous les 6 mois, et graissez la chaîne de pignon une fois.
• Vérifiez l'usure de la chaîne et du pignon tous les 1 an.